The DJI A2 multi-rotor stabilization controller is a complete flight control system for various multi-rotor platforms, for commercial and industrial AP applications. It opens an unprecedented era of precise positioning and perfect flight control in harsh environments for flight control systems.

Its high performance antenna, low noise anti-interference front-end RF design, accurate position and speed calculating, represent comprehensive technological breakthroughs. These combined features make the positioning performance of the GPS Pro near perfection; With higher accuracy performance, larger measuring range, and a unique damping design and calibration algorithm, the IMU is able to provide stable output even in high vibration and large movement environments. The built-in receiver system directly supports the popular transmitters, and it also supports a variety of external receivers. Combined with abundant output interfaces and flexible configuration, it makes the flight controller competent for complex control and airborne equipment operation; the new dual CAN-Bus design greatly improves the data throughput and stability of the system.

Based on the technology and design philosophy of DJI €™s Ace series of high-performance controllers, the A2 offers you a brand new flight experience. The A2 adopts a full metal case design and utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renowned flight algorithm in flight control and UAV field.

 

GPS-Compass Pro Module

GPS-COMPASS PRO MODULE

The GPS receiver of the A2 GPS-Compass Pro Module is equipped with a new high gain and high performance right-handed circular polarized (RHCP) antenna, the low noise anti-interference front-end RF design and the optimized localization algorithm, which provides the GPS Pro with stronger anti-interference performance, a stronger ability to capture satellite signals and a more accurate position hold calculating ability. All these features have enhanced its position locking capability.

The A2 has a POI function When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest with the nose pointing at the POI in an area of 5 meters to 500 meters radius, when the roll command is given. This function is easy to set and simple to operate, it is suitable for all-round shooting of a fixed scenic spot.

High Sensitive Built-in Damper IMU Module

HIGH SENSITIVE BUILT-IN DAMPER IMU MODULE

The interior sensor of the A2 IMU has been upgraded comprehensively, and with higher accuracy performance, larger measuring range, and a unique damping design and calibration algorithm, the IMU is able to provide stable output even with high vibration and a large movement environment. The advanced sensor temperature compensation algorithm and industrialized accurate calibration algorithm gives the IMU excellent performance. With the DJI innovative damping structure and material, it is unnecessary to install a framework or cushioning, you can simply stick it on the aircraft. Small size and weight allow easy installation in a tight space, it simplifies the installation process, for various aircraft sizes.

Built-in 2.4Ghz DR16 Receiver

BUILT-IN 2.4GHZ DR16 RECEIVER

The A2 has a built-in 2.4Ghz Radio technology DESST receiver system (the newest DJI Enhanced Spread Spectrum Technology), which supports the Futaba FASST series of transmitters. It can support 16 channels. Futaba transmitter users can use the system without any external receiver, which has greatly simplified the complexity of the system and improved the security of the remote control system.

Support for external receivers

SUPPORT FOR EXTERNAL RECEIVERS

A2 system has two reserved JR and SPEKTRUM satellite receiver ports, which support JR and SPEKTRUM satellite receivers. It currently supports SPEKTRUM DX6I, DX8 transmitters, other JR or SPEKTRUM series will be supported in the future.

The system supports external receivers including the Futaba S-Bus receiver, PPM receiver.

Dual CAN-Bus system

DUAL CAN-BUS SYSTEM

The A2 system has a dual CAN-Bus design, which means that the system data throughput will be doubled and the extendibility is improved. At the same time, the important data and the non-critical data are assigned respectively on different CAN-Bus ports, which greatly improves the system stability.

More output interfaces

MORE OUTPUT INTERFACES

The A2 is equipped with a minimum of twelve output channels, users can easily use it to control an Oct-rotor, and the other four channels can be used as a general output interface, for example, to control the DJI retractable landing gear on S800 EVO, to control Gimbal or camera switch, etc.

Precise Position Hold and Wind Resistance

PRECISE POSITION HOLD AND WIND RESISTANCE

With the new generation GPS Pro/CompassModule and the hardware upgraded IMU module, the A2 has an optimized inertial navigation algorithm, which ensures the system can get a more reliable and accurate position and attitude estimate. The aircraft which is equipped with A2 will have very good performance in position hold even in a semi-closed environment, such as between buildings, it also has excellent hovering performance. At the same time, with the optimized algorithm of inertial navigation and the algorithm of wind resistance, the Wind Resistance performance of A2 is also improved, and the multi-rotor can have position and altitude locked accurately even in windy conditions.

High Accuracy and intuitive Flight experience

HIGH ACCURACY AND INTUITIVE FLIGHT EXPERIENCE

With the A2, flying a multi-rotor will be as easy as driving a car. The pilot is released from the stress of controlling the multi-rotor and able to pay more attention to other tasks, instead of focusing on flying.

The MULTI-ROTOR ONE-MOTOR FAIL PROTECTION -  Means that when the aircraft is in attitude or GPS attitude mode, and one of the motors stops, the aircraft will retain good attitude and rotate around the frame arm with the stopped motor. In this condition, the aircraft is still under control and returns home safely and highly reducing the risk of a crash.

Supports Online Firmware Updates

 

SUPPORTS ONLINE FIRMWARE UPDATES

Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly.

9 Types of Multi-rotor and a Customized Motor Mixer
 
The A2 supports 9 types of traditional motor mixer
Quad I, Quad X 
Hex I,Hex V, Hex Y, Hex IY 
Oct X, Oct I,Oct V

It €™s a UAS that €™s targeted at commercial and industrial multi-rotor platforms with simple configuration, easy installation and stable performance. It also supports customized motor mixing, which greatly meets the demands of particular users.

SPECIFICATIONS

 

dji-a2-flight-controller-dimensions.png

 

Peripheral

Supported Multi-rotor

Quad-Rotor: +4,x4;
Hex-Rotor +6,x6,Y6,Rev Y6;
Octo-Rotor +8,x8,V8

Supported ESC output

400Hz refresh frequency

Supported Transmitter for Built-in Receiver

Futaba FASST Series and DJI DESST Series

External Receiver Supported

Futaba S-Bus, S-Bus2, DSM2

Recommended Battery

2S ~ 6S LiPo

Operating Temperature

-5°C to +60°C

Assistant Software System Requirement

Windows XP SP3 / 7 /8 (32 or 64 bit)

Other DJI Products Supported

Z15,H3-2D,iOSD,2.4G Data Link,S800 EVO

Flight Performance

Hovering Accuracy(In GPS Mode)

Vertical: ± 0.5m
Horizontal: ± 1.5m

Maximum Wind Resistance

< 8m/s (17.9mph/28.8km/h)

Max Yaw Angular Velocity

150 deg/s

Max Tilt Angle

35°

Ascent/Descent

±6m/s

Electrical & Mechanical

Power Consumption

MAX 5W (Typical Value: 0.3A@12.5V)

Built-In Functions

Built-in Receiver
Multiple Control Modes
2-axis Gimbal Supported
Low Voltage Protection
PC & Bluetooth Ground Station
External Receiver Supported
Intelligent Orientation Control
Sound Alarm
4 Configurable Output

Total Weight

Total Weight: <= 224g(overall)

Dimensions

Flight Controller: 54mm x 39mm x 14.9mm
IMU: 41.3mm x 30.5mm x 26.3mm
GPS-Compass Pro: 62mm (diameter) x 14.3mm
LED-BTU-I: 30mm x 30mm x 7.9mm
PMU: 39.5mm x 27.6mm x 9.8mm

 

(DJI-A2-FC)

SKU DJI-A2-FC
Brand DJI

Be The First To Review This Product!

Help other Birdio users shop smarter by writing reviews for products you have purchased.

Write a product review